Jump to content
Corsair Community

Ran memtest, full of errors


defkorn

Recommended Posts

system was crashing randomly, checked PSU, HDD, then finally the memory. should have saved myself the 2 hours because memtest immediately found errors. ive got part numbers, etc if needed. want to get an RMA number to get this replaced. had great service before when i needed memory replaced, hope it goes as smoothly this time. thanks in advance

 

edit: forgot to say i have VS512MB400 x 2, came as a 2x512MB kit

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...