cassiusuk Posted February 6, 2007 Share Posted February 6, 2007 SPECS CPU: INTEL CORE 2 DUO E6600 2.4 CONROE CPU COOLER: COOLERMASTER HYPER L3 MBOARD: ASUS P5N32-E SLI PLUS (NVIDIA 680i) MEMORY:2GB (2x1GB) CorsairTwinX XMS2 DDR2 PC2-6400 (800 MHZ) 240 Pins, Non-ECC Unbuffered CAS 4-4-4-12 EPP HARDDRIVES: 2 X WESTERN DIGITAL SATA RE 250 GB AT RAID 0 ARRAY Ok, THIS IS WHAT I CHANGED IN THE BIOS FOR MY 2 X 1 GIG STICKS OF CORSAIR XMS2 DDR2 800 MHZ LATENCY OF 4-4-4-12 The settings I changed in detail were: tCL (CAS Latency) - 4 tRCD - 4 tRP- 4 tRAS - 12 As it says 4-4-4-12 on the mem stick(they were all normally set at auto, as default). Is this OK???? Command Per Clock(CMD) which had three options auto, 1 clock and 2 clock I changed it to 2 clock, is this ok?? or is 1 better or even auto?? Link to comment Share on other sites More sharing options...
Yoxxy Posted February 7, 2007 Share Posted February 7, 2007 You should use 2 clocks. Also remember to set your Memory Voltage to 2.1v. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.