Jump to content
Corsair Community

Asus P5N32-E SLI and TwinX2048 6400C4


Recommended Posts

Hi guys,


These are my system Specs:

Core 2 Duo E6300

GeForce 8800GTS

Asus P5N32-E SLI

Corsair TwinX2048 6400C4

Tagan TG600-U25


I often got bluescreens in games which don´t say "Fatal Graphics Error", but reboot the system. So I ran Prime95, all tests run good, excepting the "Blend" test, which is very Ram intensive, like the program says.

The Bios timings are set to 5-5-5-15 2T at 2.19V, but still, it isn´t stable.

I then started CPU-Z, it said, that the TrC timing is 1 instead of 22 like the SPD says. In the BIOS it was set to [Auto]. I then corrected it. Crashes are less often, but it still crashes. The other "Advanced timing settings" in my BIOS are set to [AUTO], so I think, the Mainboard sets them too aggressive, so the memory gets too much.

So my question: Can you tell me the "Advanced timing settings" for my Memory?

The latest BIOS (0702) is already flashed.




P.S.: I´m sorry for this bad english, but hey, I´m still in school :D:


[EDIT] I just changed the "advanced timing settings" to maximum instead of Auto, till now, everything is fine, so I think that the mainboard sets all these timings to 1 or just too aggressive. Would be nice, if someone could tell me, which timings are accurate for these things or at least which ones they have with their 6400C4s

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...