Jump to content
Corsair Community

P4P800 Deluxe with TWINX2048 3200c2


Othon1001

Recommended Posts

Hello

 

I have a little problem with my new memory

code 2G-400 twinx 2048 3200c2

MB: asus P4P800 Deluxe bios 1021

 

If I use memory alone there is no problem on my computer ( with modification BIOS for 2-3-3-6)

But if i use twinx memory together ( in the blue connector on my MB and modify BIOS for 2-3-3-6 )

My MB detected dual channel 400 hz but i can't use winrar there is always a error but no on the same file

exemple

first use winrar for unrar error r01

second use winrar for unrar error r22

third use winrar for unrar error r05

but in reality there is no error on rar to r25

 

There is too a unexpected software error ( firefox , winword etc…. ) the message is error in memory

 

Nobody have the same problem ?

sorry for my english

Link to comment
Share on other sites

New Test

 

memory A serial 040129ab

memory B serial 01021e21

 

memory slot 1 -> put in memory A no problem (2/3/3/6 voltage auto for DDR)

memory slot 1 -> put in memory B no problem (2/3/3/6 voltage auto for DDR)

 

memory slot 3 -> put in memory A no problem (2/3/3/6 voltage auto for DDR)

memory slot 3 -> put in memory B no problem (2/3/3/6 voltage auto for DDR)

--

if make

memory slot 1 -> put in memory A (auto (3/3/3/8) voltage auto/2.65/2.75/2.85) and memory slot 3 -> put in memory B (auto (3/3/3/8) voltage auto/2.65/2.75/2.85) => Problem

or

memory slot 1 -> put in memory B (auto (3/3/3/8) voltage auto/2.65/2.75/2.85) and memory slot 3 -> put in memory A (auto (3/3/3/8) voltage auto/2.65/2.75/2.85) => Problem

 

the same with 2/3/3/6 and auto/2.65/2.75/2.85

--

Is there a tool for testing the dual channel between 2 memory ?

Perhaps there is a synchronizations problem.

for the moment i use 2 memory pc 2700 512kb in the slot 1 and 3 and there is no problem.

 

Thanks for the move in the good forum

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Hello

 

For my previous post ( New Test )

i use the corsair twinx2048-3200c2

 

now I'm trying with 2.75 volt and 2-3-3-6

if i use alone memory no problem with winrar ( is not only with winrar the other program crash with the memory error message but not always )

if i use together error crc with winrar. ( slot on motherboard first test slot 1 and slot 3 second test slot 2 and slot 4 )

 

Afflicted for my not very clear explanations

Monday I will test with another mb ( if I find one )

Link to comment
Share on other sites

The test

 

Im trying on a other motherboard i have the same problem with winrar and par2

( for the other process crash suddenly error memory message but no always)

 

I thing there is a problem with synchronization dual channel

 

for the test voltage 2.75 and 2-3-3-6 for cas etc...

Link to comment
Share on other sites

  • 3 weeks later...

Hello

 

that's crazy :

1 . internet request (02/11)

2. mail request with rma_request.xls (02/18)

3. mail again with rma_request.xls (02/22)

and nothing answer :(

 

I live in belgium, i don't call USA just for a rma number ....

 

What's the problem with the rma service ?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...