Jump to content
Corsair Community

RAM problems


Vos

Recommended Posts

I have 2gb of corsair xms2 (TWIN 2X2048-6400) and received an error while installing windows. reinstalled, worked fine ..now i am getting errors while installing world of warcraft. ran memtest 86 and showed 70000 errors with legacy usb disabled all memory settings are on auto please help
Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and then set the Dim Voltage to 2.1 volts (+.2 Volts W/Giga-Byte) and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

changed the voltage to 2.1, and set the memory to pc800 5-5-5-12

ran memtest & isolated one bad module by running them one at a time.

 

I just bought the ram through newegg, should RMA it through them or corsair?

 

Thanks for all your help!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...