dinkleman Posted January 23, 2007 Share Posted January 23, 2007 Hey I need a "*Ticket#/PostID#" so I can fill out this online RMA form. my ram is bad, and wont post. this stick of ram caused a series of crashes to occur on my system. soon my pc didnt recognize it, and as soon as i took it out my pc was fine again. i also tested it in friends computers and it doesnt work at all. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2007 Corsair Employees Share Posted January 23, 2007 Can you tell me our modules part# (How To Read the Memory Label) and the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
dinkleman Posted January 24, 2007 Author Share Posted January 24, 2007 CMX1024-3200C2 (1024mb stick) xms3202v2.1 mobo = MSI 7207G cpu speed = 2411.0 mhz i dont know the FSB speed. i havent changed or edited any bios settings for either the cpu or ram. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 24, 2007 Corsair Employees Share Posted January 24, 2007 Please NOTE if this is in an OEM system you may not be able to set the memory voltage and if not I am sorry but these modules may not work properly in this system. Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.