Jump to content
Corsair Community

several defects with my ram


delabluna

Recommended Posts

Hi, hope someone can help a guy from german..?

 

 

Motherboard ASUS P4C800 Deluxe

GPU : Sapphire Atlantis Radeon 98000 Pro

CPU : P4 3000mhz northwood

 

Running 2x 512MB Corsair CMX512-3200C2 XMS3202v3.1 0412029-2

Recently, I began experiencing problems..

Together in Dual Channel the sticks has spit out 20 errors and is running since 4hours yet.

 

I spoke to the store at which I purchased the RAM, I was unhappy to hear that the warranty only covered two years.

 

Therefore I appeal to you ..

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...