Jump to content
Corsair Community

P5W DH Deluxe and XMS2-6400C4D


arbaz

Recommended Posts

Hello all,

 

I've a P5W DH Deluxe with XMS2-6400C4D but i wanna want to know what's the setup can i make on the BIOS for the timing. I've readed the article : " Dominator Qualification and Testing " but the settings are make for P5B, P5WD2 or M2N32-SLI Premium/Deluxe and not for P5W DH Deluxe. Can i used the same settings ?

 

Best regards.

Link to comment
Share on other sites

Please help me :)

 

Certainly :)

 

Try these settings:

 

Configure System Frequency/Voltage

  • AI Overclocking = Manual

  • CPU Frequency = 266

  • DRAM Frequency = 800MHz

  • Performance Mode = Auto

  • PCI Express Frequency = 100

  • PCI Clock Synchronization Mode = 33.33

 

  • Memory Voltage = 2.1v

  • CPU Core Voltage = Auto

  • FSB Termination Voltage = Auto

  • MCH Chipset Voltage = Auto

  • ICH Chipset Voltage = Auto

Advanced Chipset Settings

  • Configure DRAM by SPD = Disabled

  • DRAM CAS# Latency = 4

  • DRAM RAS# Prechardge = 4

  • DRAM RAs# to CAS# Delay = 4

  • DRAM RAS# Activate to Precharge: 12

  • DRAM Write recovery Time = 4

 

Leave all else on AUTO settings. Download Memtest from http://www.memtest.org and write the image to a CD. Boot to the CD and allow a few passes.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...