Jump to content
Corsair Community

Bad memory module CMX1024-3200c2


zebo4

Recommended Posts

I Purchased a set of (2) 1gb dual channel XMS 3200 for My Dell 8300 ten months ago (from Newegg).

My computer started acting odd and I started getting error messages. I determined that 1 module seem to be bad. Memtest86 finds errors throughout one of the modules. The other module tests OK. timings on both are the same. I tried the modules in a different computer and have the same test results- 1 bad module. Do I need to return the pair (dual channel pair) or just the 1 bad module ? or do you have any other suggestions, Thanks.

Link to comment
Share on other sites

  • Corsair Employees

Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them or it.

 

However, I would not suggest using these modules in this system as the modules have a minimum suggested voltage of 2.75 Volts and this system will not let you set the Voltage for the memory.

 

Please look up your system on our memory configurator and use the modules that are suggested.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...