Jump to content
Corsair Community

Dead CMX1024-3200PT


pablosuazo

Recommended Posts

Hi, after about a year using this memory ( 2x cmx1024-3200pt v6.1 )one day started giving me windows errors, try rebooting in normal and safe move and nothing, thinking it was software problems i try reinstalling the OS but started getting "cannot write to disk" errors, I've seen this problem before so i asked my friend to let me use his memory ( 2 x 1Gb corsair value) and my system works again with no problems, and yes i did check my timings before a replaced the memory 3.3.3.8., Please Ram Guy Let me know what to do.

 

Thanks

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 volts and then set the timings manually to the tested settings for the specific module you have (Cas 3-3-3-8), and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...