Jump to content
Corsair Community

One of my sticks has an error


Recommended Posts

I have a TWINX1024-2700LL. I ran memtest, and it shows that it has an error on one of the modules. I used 2 different motherboards to verify the error, and they all come back with errors. BIOS memory settings are all at auto/default. Can I RMA this memory?
Link to comment
Share on other sites

  • Corsair Employees

These modules have minimum suggested voltage of 2.75 Volts, please make sure that you set the bios settings to the tested setting and test the modules one at a time with http://www.memtest.org to be sure.

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

Memory Timings: Manual/User Define

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 5T

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...