Toshiya Posted January 10, 2007 Share Posted January 10, 2007 One of my 256mb Corsair Value Select memory sticks is bad. I kept getting memory errors in a game and after trying different things I decided to run memtest86 ver 3.2. It came up with lots of errors for my RAM. So I took one ram stick out and ran memtest86 again and it came up with no errors. Then I tried the other memory stick alone with memtest and it came up with errors. I ran memtest twice with each different test to make sure. And also my game is running with no memory errors with just the one good stick of ram. Can I get this stick replaced? Unless you think it could be something else? Thank you!:): Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 10, 2007 Corsair Employees Share Posted January 10, 2007 Can you tell me our modules part# (How To Read the Memory Label) and the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Toshiya Posted January 12, 2007 Author Share Posted January 12, 2007 Can you tell me our modules part# (How To Read the Memory Label) and the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? The part # is VS256MB400C3 The CPU speed: 2.4 GHz FSB: 533 BIOS Setting CPU: Frequency: 2400Mhz FSB Speed: 533Mhz Cache L1: 16kb Cache L2: 1024kb Cache L3: 0kb I don't see any BIOS settings for memory? Thankyou a lot for the help!:): Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 12, 2007 Corsair Employees Share Posted January 12, 2007 Please set the following settings and then test with http://www.memtest.org and you might need to disable legacy USB when running any memory test on this MB. System Performance: User Define Memory Frequency: 166/DDR333 Dim Voltage to 2.7 Volts Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 7T Link to comment Share on other sites More sharing options...
Toshiya Posted January 16, 2007 Author Share Posted January 16, 2007 Please set the following settings and then test with http://www.memtest.org and you might need to disable legacy USB when running any memory test on this MB. System Performance: User Define Memory Frequency: 166/DDR333 Dim Voltage to 2.7 Volts Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 7T Hmmm, I can't see any of those settings to change them? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 17, 2007 Corsair Employees Share Posted January 17, 2007 Please check your manual usually section 4 with ASUS or call our Tech Support at 800-205-7657 and we will try to help you. Our hours are from 8:30 AM to 5:30 PM Pacific Time Monday Thru Friday excluding holidays. Link to comment Share on other sites More sharing options...
Toshiya Posted January 20, 2007 Author Share Posted January 20, 2007 That seemed to have fix it! I haven't had any RAM issues since and memtest says there are no errors anymore. Thankyou very much for the help!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2007 Corsair Employees Share Posted January 23, 2007 NP Thank you for letting me know! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.