itsbaza Posted January 5, 2007 Share Posted January 5, 2007 i find it strange how 2 identical sticks of ram just suddenly fail and cause my system to blue screen - then fail the ram test on vista test builds ! so after spending hours re-installing XP and getting to the same reboot point - or not even rebooting only to pull my system apart and spend even more time wondering what was wrong to discover memory issues with 2 sticks of value select VS512MB400 ram - drove me crazy so i guess its time to RMA them !any one else had issue with this ram ? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 6, 2007 Corsair Employees Share Posted January 6, 2007 Please load setup defaults and then set the Dim Voltage to 2.75 volts (+.2 Volts W/Giga-Byte) and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
itsbaza Posted January 17, 2007 Author Share Posted January 17, 2007 already done that - one 3 other systems all bad - ive already got an RMA number but thanks for the info :D Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 17, 2007 Corsair Employees Share Posted January 17, 2007 Let's go ahead and get them replaced but if you are getting errors with all three modules I would suspect some other problem, it would be close to impossible all three fail at the same time, unless the MB is damaging them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.