Jump to content
Corsair Community

Asus A8V-E Deluxe & TWINX2048-3200C2 Problems


Recommended Posts



I've Problems with my TWINX2048-3200C2 and the Asus A8V-E Deluxe.


When I'm playing Games like BF2142 they are crashing with a Memory Error.


I've tested the DIMM's with memtest in Single Channel Mode - no Errors.

In Dual Chanel Mode they are performing Errors.


I've tested them in various combinations with

2-3-3-6 @ 2,7 - 2.8V

2,5-3-3-6 @ 2,7 - 2,8V

2,5-3-3-8 @ 2,7 - 2,8V


In DIMM Slot A1+B1 A2+B2. Always Errors...


My current BIOS vers. 1012

TWINX2048-3200C2 (2 x XMS3202 v.1.2)


Do you have ideas what i can do?


P.S.: Sorry for my bad English :P

Link to comment
Share on other sites

  • Corsair Employees
I am sorry I have never heard of that make of PSU, but the problems you have described might suggest a power problem, can you maybe barrow another PSU from a friend and test them again? Or test them in another system to be sure?
Link to comment
Share on other sites



I've asked the Asus Support and they told me that these DIMM's are not supported in Dual Channel Mode.


Only in Single Channel Mode.


But on the compability Site of Corsair the TWINX2048-3200C2 are compatible.

I assumed that these DIMM's are working in Dual Channel. :sigh!:

Link to comment
Share on other sites

  • Corsair Employees

Thats just not right, if the modules will run one up but not in DC mode that would suggest a problem with the MB or Bios.

We can try replacing the modules if you like but these modules are tested in a Dual channel MB before they leave our factory!

Link to comment
Share on other sites

default setup

USB Legacy Support disabled


A2 - B2

2,5-3-3-6 @ 2,75V


memtest86+ v1.65


after 12h 39min


1 Error


Test: 8

Pass: 2

Failing Adress: 0004adb82f8 - 1197,5MB

Good: ffff ffff

Bad: fbff ffff

Err-Bitts: 0400 0000

Count Chan: 1


as was expected. :/





Any ideas?

Or can anybody tell me a MB where i can use these DIMM's in DC?

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...