mixmax Posted January 3, 2007 Share Posted January 3, 2007 memtest-86 v3.2 chipset -NVidia nForce 2 SPP/FSB :166 mhz settings ram --199 mhz (ddr 398) Cas:3-3-3-8/Dual Channel (128 Bits) Athlon XP (0.13)2158mhz L1 128-13236 mb/s L2 256-4214 mb/s memory 1024 1138 mb/s test -5 Pass -2 Failing address (0002eefc540 750.7mb)(0002fefc520 766.7mb) good(00c00000)(00c00000) bad(00800000)(00800000) Err-Bitts(00400000)(00400000) Count 1 This is the corsair memory module I am using with corresponding serial number which should still be under warranty ++++CMX512-3200C2PT(xms3202v4.3)(0532039-1)+++ Other memory works when substituted on this mainboard,with no crashes, passing results and with no errors from a memtest run. But with the corsair it has random crashesand the resulting error which does happen on test 5 and only on pass 2 after 3 passes. I have contacted tech support express with no reply. I have contacted the warranty department who says I need a RMA. I need your help RAMGUY. I am Assuming this is a bad result on an MSI K7N2 Delta2 MB Dual channel enabled- Athlon XP 2700+ -What should I do Now to recieve my RMA. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 3, 2007 Corsair Employees Share Posted January 3, 2007 With that CPU you will need to set the memory frequency at DDR333, please try these settings and then test the module with http://www.memtest.org to be sure! CPU Freq: 166 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.7 Volts Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.