DarkNite Posted January 2, 2007 Share Posted January 2, 2007 I'm suffering from this exact problem right now with my DFI NF590 and 2 pairs of XMS2 TWIN2X2048-6400C4. I've systematically eliminated all possible options attempting to get these modules working in dual channel mode. The one remaining issue in my mind is the board's BIOS are missing a vdimm setting for 2.10V and that's what "EPP Profile 1(full)" wants. It's either that get's fixed, or I get the oppurtunity to ignore EPP Profile settings (which is what I thought disabling "SLI Ready Memory" should do). On the bright side these modules have proven their strength to me in single channel mode when I set everything up manually. It's just a shame that my board won't post when all, or even half of my memory is installed. Edit: This is the first time I've EVER had issues I couldn't solve on my own when using Corsair modules. I've been building PC's for longer then Corsair has been manufacturing parts, and they've always been good to me. Need proof? This is my first post here... 'nuff said. This was meant to be a reply in this thread. Please move. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 3, 2007 Corsair Employees Share Posted January 3, 2007 Can you test the modules on another system? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.