Jump to content
Corsair Community

Is this a memory problem?


Jamo

Recommended Posts

Had a new PC built with DFI Infinity 975x/G Mobo, Core 2 Due e6600, XFX 8800GTS video card and Corsair 5-5-5 PC2 6400 Twin 2 xXMS 2GB with MS XP Pro.

 

All working fine in the first week then playing "Medieval Total War 2" and halfway thru the game the computer reboots. Since then every time I have tried to start the PC, it reboots itself when it completes the initial memory test. I cannot get past this to enter the BIOS or do anything!

Very frustrating. Any ideas??

Link to comment
Share on other sites

  • Corsair Employees
Please load setup defaults and then set the Dim Voltage to 2.1 volts (+.2 Volts W/Giga-Byte) and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...