jweikel Posted December 30, 2006 Share Posted December 30, 2006 While on the computer, it crashed and then started doing the following at boot up : Boot Block Compatible Version Ver.010 Bad BIOS Checksum. Starting BIOS Recovery... CD-ROM found. Reading file "A8N32SLI.Rom". Completed. Start Erasing... Start Programming... Please turn off your system and power on again to get system back. I replaced the motherboard and had the same issue. I replaced the memory with some from another system and now the system is back up. I put this memory back in and got the same problem. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 2, 2007 Corsair Employees Share Posted January 2, 2007 Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.