Shanman823 Posted December 18, 2006 Share Posted December 18, 2006 After various problems with my computer i finally took it into the local best Buy and had there techs do a diagnostic on my coputer. They determined that my memory was bad and that i should have it replaced. Looking to start the RMA process. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 18, 2006 Corsair Employees Share Posted December 18, 2006 Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.