scott_in_VT Posted December 12, 2006 Share Posted December 12, 2006 I have a dual channel 1GB memory kit, and 1 of the memory modules no longer works. I have verified this in 2 systems by the following methodology: 1. plug both modules into board in dual channel DIMMS 2. boot up 3. BIOS only sees 512MB 4. remove good module and place bad module in DIMM1 5. boot up with no luck 6. place good module in DIMM1 7. boot up with 512MB in single channel mode Here is all the information about them as it appears on the sticker: CMX512-2700C2 XMS2702v1.3 0304038 XMS2700 512BM 333 MHz CL2 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 12, 2006 Corsair Employees Share Posted December 12, 2006 Let's get them both replaced. Please use the RMA request found in TSXpress or follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! And please note that you are from the forum! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.