Dade22 Posted December 10, 2006 Share Posted December 10, 2006 New system: MSI K9N Platinum AMD 5200x2 XMS2x1024-6400c4 The problem Im having is that when both sticks are used the system wont boot. If I remove one stick it will work fine. I tried to swap the stick that worked for the one I took out and guess what...the system wouldnt boot again!! I think I may have a bad stick in this kit. Also, when using CPU-Z I get reports that the stick that is in the system, is only running at 400mhz, with cas of 5. What are the correct timings for this board and memory??? Any ideas on timings and what I need to do as replacing the bad stick or both since they are in a matched pair kit. Thanks. Dade22 Link to comment Share on other sites More sharing options...
DerekT Posted December 10, 2006 Share Posted December 10, 2006 New system: MSI K9N Platinum AMD 5200x2 XMS2x1024-6400c4 The problem Im having is that when both sticks are used the system wont boot. If I remove one stick it will work fine. I tried to swap the stick that worked for the one I took out and guess what...the system wouldnt boot again!! I think I may have a bad stick in this kit. RamGuy will be back on Monday so if you post this issue in the Warranty section, he will deal with it then. Also, when using CPU-Z I get reports that the stick that is in the system, is only running at 400mhz, with cas of 5. What are the correct timings for this board and memory??? CAS Latency (tCL): 4 RAS to CAS Delay (tRCD): 4 Row Precharge (tRP): 4 Active to Precharge Delay (tRAS): 12 Link to comment Share on other sites More sharing options...
Wired Posted December 10, 2006 Share Posted December 10, 2006 FYI it doesn't strictly have to be in the warranty forum to get an RMA. Link to comment Share on other sites More sharing options...
DerekT Posted December 10, 2006 Share Posted December 10, 2006 Ah, I see. Thanks for the heads up. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 12, 2006 Corsair Employees Share Posted December 12, 2006 Let's get them both replaced. Please use the RMA request found in TSXpress or follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! And please note that you are from the forum! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.