The Puma Posted December 3, 2006 Share Posted December 3, 2006 Whats are the best setting (in MIT Gigabyte GA-965P-DQ6) for the memory. CPU is Intel Core 2 Duo E6600 2.40GHz FSB1066 4MB and what can i best use for the CPU settings? I have problems that the board will not boot (switch only on and off) Have fiddle a while with other memories and it boards Please how can i get the CM2X1024-8500C5 work with the gigabyte GA-965P-DQ6 Thx John Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 5, 2006 Corsair Employees Share Posted December 5, 2006 Please make sure that you have the latest Bios and then load setup defaults and set the memory Voltage to 2.2 Volts (+.4 Volts for GigaByte) and then set the tested settings for these modules. Cas 5-5-5-15, but I doubt this MB will be able to run these modules at their tested or rated frequency about 1030 Mhz will be tops for this MB. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.