Jump to content
Corsair Community

TWIN2X2048-6400C4 on M2N32-SLI Deluxe


Recommended Posts

Ok, here's the problem. I have 2GB of this RAM and when I initially installed it, the motherboard defaults the timings to 5-5-5-18-2T when it's rated for 4-4-4-12-2T. It's Cas4 memory! So I went into the BIOS and manually set it to the settings it should be at and set DDR voltage to 1.9v.


With that setup the computer was working fine at stock settings. I wanted to OC however and was getting errors on POST when I changed my BIOS setting for HT multi and FSB. So I upped my RAM voltage to 2.1v and lowered the timings to 5-5-5-18-2T. This time I made it to windows but it got stuck in a reboot cycle 2 seconds after loading windows. It made it into windows every time, then it would reboot after 2 seconds.


So last night I ran memtest86 on it for 7 hours and well... you tell me. Is an RMA in order? The memtest was run with everything on stock settings and the RAM set to DDR2-800 4-4-4-12-2T @ 1.9v. Right now I have everything stock and RAM at 5-5-5-18-2T and I can at least stay in Windows.


Is there a reason I'm getting no response?


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...