sepaider Posted November 20, 2006 Share Posted November 20, 2006 i have mb dfi nf4 ultra inf, proc amd 64 4600+, ddr 1gb x 2 pc 3200 value corsair. i have a problem in ram. bios mbo detect ddr 333 if single channel. but if dual channel detected ddr 400. then, windows run unstability. if i restarted the windows, windows will hang. ddr run in standard cl 3. :[pouts: then, i have dowloaded new bios for that mb.is the mainboard not compatible with corsair ??? please help me... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 20, 2006 Corsair Employees Share Posted November 20, 2006 Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.