bobbo Posted November 16, 2006 Share Posted November 16, 2006 I have a Dell Dimension 5150 system with 1GB RAM. I would like to add an additional 2GB. The System Select search says I should use p/n CMSS1GB-533. Can I use Value Select RAM VS1GB533D2? Is there a difference in these two part numbers? Thanks, Bobbo Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 16, 2006 Corsair Employees Share Posted November 16, 2006 Yes there is, I would suggest if you are adding to what you have now that you use our CMSS1GB-533 module! Link to comment Share on other sites More sharing options...
Chappers84 Posted April 3, 2007 Share Posted April 3, 2007 I also have a 5150 and have bought 2x vs1gb533d2 and when trying to load up it wont... dont even get the bleue screen or able to access the BIOS? bad memory? Chris Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 3, 2007 Corsair Employees Share Posted April 3, 2007 First do not mix these modules with any 512MBs or 256MBs. Try the following: 1. Remove all RAM 2. Power on system 3. Let it run for 20-30 seconds(system may power off prior to 20secs) 4. Remove AC 5. Only install the Corsair RAM 6. Check if system is stable Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.