kento Posted November 16, 2006 Share Posted November 16, 2006 ok i just barely bougth a new pc specs are pentium core 2 duo 2.66 Ghz geforce 7950 gt 512mb wd sata hd 250gb abit ab9 pro CORSAIR TWIN2X2048-5400C4 2GB KIT (1GB x 2) PC25400 675MHZ MATCHED PAIR 4-4-4-12 240-PIN DDR2 DIMM and this is what happends when i put the 2 gb in my motherboard crash and when i take out one of them it works for a while however its crash when i have couple of stuff open (like IE Firefox and others) and when i look the crash problem its says that its memory problem does anyone have that problem too? in other pcs? i just want to know suggestions bcuz its fustrating that its a new pc and with problems.... thank you Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 16, 2006 Corsair Employees Share Posted November 16, 2006 Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.