Jump to content
Corsair Community

TWIN2X2048-6400PRO voltage?


brianm602

Recommended Posts

Hello all I am new here and to the Corsair family, so bear with me if I am asking a redundant question.

 

I recently built a new pc with the TWIN2X2048-6400PRO CL5, for the life of me I could not find the official voltage rating on these sticks; the retailer where I bought them from had a rating of 1.9v listed.

 

Do these particular sticks need and/or respond to more voltage? I am running them at the listed 5-5-5-12, 1:1 with 1.9v. I cannot seem to get an Orthos blend test stable for more than an hour with them at only 375MHz.

 

I know there are a lot more than just the ram that can affect an over clock but I am just looking to eliminate the possibility that I am not giving them enough voltage to run at their rated speed.

 

Added information on ram:

CM2X1024-6400PRO

XMS6405v4.1

0635009-4

 

Thanks in advance,

Brian

Link to comment
Share on other sites

XMS Qualification and Testing

Twin2x2048-6400 Data Sheet

 

Maximum DDR2 recommended VDIMM: 2.1 Volts

 

Thanks for the links, I don't know if it matters but these are the sets I have:

http://www.corsairmemory.com/corsair/products/specs/TWIN2X2048-6400PRO.pdf

 

It states that they are spd programed for 5-5-5-12 but my bios and cpu-z shows a spd chat of 5-5-5-18 at 400MHz; is this simply a bios issue and cpu-z is reading it from the bios?

 

If I am running these under 400MHz whould they perform better with tighter timmings?

 

Thanks again,

Brian

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...