Jump to content
Corsair Community

RMA Request for TWINX10243200C2P


Recommended Posts



I have some problems with my two sticks of memory. I can't install xp (BSOD) or boot a live-cd.

Trying only one stick on two others MB but no more.


Can i have a #ticket or #RMA please ?


PS: 2 sticks of CMX512-3200C2PRO (XMS3202v4.3)

ref : 0000137961 and 0000137962


PPS: I've tried every possible things with 3 MBs (Epox 8rdae , Abits NF7 v2 & NF7-s v2) , 3 Cpus (Bartons unlocked 2500+ , 2500+-M & 2600+-M) , 8 Memory sticks (BH5 or corsair) 3 GCs (x850 , 9700 Pro and 9600 xt) 3 PSUs ( 1 Antec 400 , 2 Seasonic S12 500 & 600) 5 HDs and many cables (2 keyboards & 2 mice), and 36h ...

I also tried @ fsb 100 (ddr400 - pc1600) with big timings (3-5-5-11) and 2,9v one by one , but the twos are defective.

Link to comment
Share on other sites

  • Corsair Employees

Please try the following settings. You can set them in your BIOS, if you have trouble locating one of the settings consult your manual or please contact the support team of your motherboard manufacturer.


DRAM Voltage (also called DDR VOLTAGE): 2.75


DRAM Clock: 200 MHz / DDR400

SDRAM CAS Latency: 2 (2.5 in an AMD system)

SDRAM RAS to CAS Delay (tRCD): 3

SDRAM Row Precharge (tRP): 3

SDRAM Active to Precharge Delay (tRAS): 6

All other settings are motherboard defaults.


Please let me know if you need further assistance.

Link to comment
Share on other sites

lol , i edited my post when you reply.


indeed , i've tested the ram sticks individually in 3 working pc , but i v some errors (@ 2,7 or 2,8 , @ 2,5-3-3-9 or 3-4-4-9 , same things) i've desactived all memory optimisation in the bios , but it don't want to work !


I've testing the last 36h every possible combination , i noticed that a red led don't work on a stick , can that have a report ?

Link to comment
Share on other sites

  • 2 weeks later...


This topic is now archived and is closed to further replies.

  • Create New...