m4a2t0t Posted November 13, 2006 Share Posted November 13, 2006 I have 2 CMX1024-3200C2PRO Modules that are showing bad in Memtest. I get nothing but errors from 2GB down to 0. I have installed some crucial memory and all is ok. I was playing a game and my system just shut off and would not load windows. This system has been working for the past 6 months or so. I have tested the memory in both set of DIMM slots Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 14, 2006 Corsair Employees Share Posted November 14, 2006 Can you tell me bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
m4a2t0t Posted November 14, 2006 Author Share Posted November 14, 2006 I have everything on default settings except disabling serial and parallel ports. Ram was running 3-3-8-3 2T I think, its set to auto. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 14, 2006 Corsair Employees Share Posted November 14, 2006 Please set the testeds settings at 2.75-.28 Volts and test the modules one at a time with http://www.memtest.org. Link to comment Share on other sites More sharing options...
m4a2t0t Posted November 14, 2006 Author Share Posted November 14, 2006 one stick tests good throu 2 runs and with the other stick the computer starts but I get no video. I get no errors tho. I get the same thing now with both sticks. Link to comment Share on other sites More sharing options...
m4a2t0t Posted November 14, 2006 Author Share Posted November 14, 2006 Am I going to have to wait 24hrs for each response? Is there some other way to get this resolved? I didnt expect that I would have to go through this to get an rma. The memory will not boot up the PC now and is obviously defective. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 14, 2006 Corsair Employees Share Posted November 14, 2006 Out hours are from 8:30 Am to 5:30 Pm Pacific time, when you posted that responce we had already left for the day! Let's get them both replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it, please note that you are posting from the forum! Link to comment Share on other sites More sharing options...
m4a2t0t Posted November 14, 2006 Author Share Posted November 14, 2006 ok Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.