envy Posted November 12, 2006 Share Posted November 12, 2006 hey there, I bought this ram about 2 years ago on newegg CORSAIR XMS 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Dual Channel Kit Desktop Memory Model TWINX1024-3200LLPRO - Retail I can't find that model anymore.. So question is, What can I run with that memory? I want to upgrade another 1 gb (2x512 or 1gb stick)?? I noticed 3 other models similar to mine, 3200, 3200c2, 3200c2pt.. The timing is a little different from mine though, new chips 2-3-3-6 and mine 2.5 3 2 6 What would you recommend? Any help appreciated, Thank you for your time -envy Link to comment Share on other sites More sharing options...
Wired Posted November 12, 2006 Share Posted November 12, 2006 ONLY 3200LL are fully compatible with 3200LL. You'd have to replace them. Link to comment Share on other sites More sharing options...
envy Posted November 12, 2006 Author Share Posted November 12, 2006 ah, ok. Thank you for the fast reply! :): Link to comment Share on other sites More sharing options...
envy Posted November 12, 2006 Author Share Posted November 12, 2006 I found a 3200LL on Ebay, should run fine with my pro? I'd assume the pro version just comes with the heatsink & LED lights? thanks -envy Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 15, 2006 Corsair Employees Share Posted November 15, 2006 They should but if you are going to run more than 2 modules you may not be able to run them at the tested settings, with 4 modules I would suggest Cas 2.5-3-3-7 at 2.8 Volts and then test the system with http://www.memtest.org and go from there! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.