diocletien1 Posted November 10, 2006 Share Posted November 10, 2006 I've problems whith my mémories sticks. One run perfectly with memtest the other fails. I've many bsod. I've contacted my reseller but there is a long time i bought them so he said me to contact you. I run the memory at 2-2-2-5, 1,8 volts. Thank you. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 10, 2006 Corsair Employees Share Posted November 10, 2006 Please set the Dim Voltage to 2.8 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.