mholdenjones Posted November 9, 2006 Share Posted November 9, 2006 Hi there, I have the specs listed below. I am having a few problems with this setup. If I have bios defaults set, the system is stable and there are no issues. If I try and use the EPP settings for the memory the system will post occationally, even if I set it to 0% cpu overclock. If it doesnt post, I have to clear cmos and load setup defaults to get the system to boot again. If the system does boot with the memory set to 1000mhz, it will crash or behave iratically. I have tried setting the timmings to 5-5-5-15-5 T2, that does not help! I have also tried setting the voltage to 2.1v and 2.2v. The reason I bought this ram and mobo was to make use of my two graphics cards, as the EPP was supposed to improve my sli experience. If someone could come back to me with some correct settings for this setup that would be much appreciated. Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.