mekki66 Posted November 9, 2006 Share Posted November 9, 2006 hello, I come from Germany, my English is not so good:(: I have a problem with my Memory. I have tow 1024MB pairs, 1.Pair works at 530Mhz . Thats ok Today i get my second pair. But when i set it over 360FSB\MHZ the computer dont react anymore. :confused: If i set the timings to 5-6-6-20 the problem is still there. Over 360Mhz the sys dont react anymore. Is the Memory so bad:eek: What for chips are on the memory?? Elpidia?? Micron?? Can someone help me with my problem??? My System: Intel Core 2 Duo E6400 @ 3500MHZ @ 1,456 V-Core:d Biostar T-Force P965 Deluxe max FSB 530 Artic Cooling Freezer 7 Pro Corsair XMS2 DIMM Kit PC2-5400C4 MSI 7900GTO@GTX BIOS @735\1600Mhz:d 250GB Western Digital SATA Seagate Barracuda 7200.7 160GB SATA Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 9, 2006 Corsair Employees Share Posted November 9, 2006 Are the modules passing at their tested settings? If so then I am sorry you just have one set that will not over clock well. Link to comment Share on other sites More sharing options...
mekki66 Posted November 9, 2006 Author Share Posted November 9, 2006 Are the modules passing at their tested settings? If so then I am sorry you just have one set that will not over clock well. @testet setttings my sys freezed after a time. What for chips are on the memory?? Elpidia, Micron?? Is there any problem with the Intel 965 Chipset??? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 9, 2006 Corsair Employees Share Posted November 9, 2006 Might be either one please see the IC Inquiry Thread! 360 Mhz is over spec for these modules! With just this set Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
mekki66 Posted November 9, 2006 Author Share Posted November 9, 2006 Might be either one please see the IC Inquiry Thread! 360 Mhz is over spec for these modules! With just this set Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test. On the Memory : CM2x512-5400C4 XMS5402v.7.2 0633454-2 can you now tell me what for chips?? It is not in list perhabs it`s incompatible with my Mainboard Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 9, 2006 Corsair Employees Share Posted November 9, 2006 Again please post that in that link I provided and if its not listed I will update it tomorrow! Link to comment Share on other sites More sharing options...
mekki66 Posted November 9, 2006 Author Share Posted November 9, 2006 Again please post that in that link I provided and if its not listed I will update it tomorrow! i have done it:biggrin: Thank you for help Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.