Jump to content
Corsair Community

Intel BOXDQ965GFEKR and TWIN2X1024A-6400


veneroso

Recommended Posts

I am considering buying the Intel BOXDQ965GFEKR micro atx motherboard coupled with the TWIN2X1024A-6400 modules.

 

The board supports DDR 2 800 and would seem to be compatable.

 

However there is a note on newegg.com's site that concerns me.

 

"Notice: Only DDR2-800 memory supporting JEDEC approved 1.8V operation with timings of 5-5-5 or 6-6-6 is supported on Intel Desktop Boards based on Intel 965 Express Chipsets."

 

The timings for this memory seem fine, but the voltage concerns me. Is this a misprint on newegg.com, or is there no memory compatable for this system, as most modules are 1.9v and not 1.8v?

 

Thank You.

Link to comment
Share on other sites

  • Corsair Employees
The minimum suggested voltage is 1.9 Volts with these modules and as far as I know that MB will not allow you to set the memory Voltage, but to be sure I would talk to the MB maker. Other wise I would suggest VS2GBKit667D2 with any Boxed Intel I965 chipset MB.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...