punchie137 Posted November 9, 2006 Share Posted November 9, 2006 i just paid a local computer store to build my computer. when i finally got it back the first thing i did wuz buy antivirus(zone alarm). the next wuz load my games: g.r.a.w.- bf2142-and f.e.a.r. time to play right? WRONG. go to run game, title screen comes up in windows(normal) then goes black as if it is going into game, then it reboots. no error message no blue screen, just black and reboot. occassionaly it will go into game but never more than a minute. guy at store thinks its graphics card. call bfg, they think it is the ram. anyone please help. Asus p5w dh deluxe e6400 core 2 duo xms ddr2 twin2x1024a-6400 (512x2) western digital 500gig hd bfg 7900gt oc 2 bfg 800w psu apevia superalien Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 9, 2006 Corsair Employees Share Posted November 9, 2006 Please try and set the tested setting with the Voltage set to 2.1 Volts and Change ‘Write to Precharge delay’ in the BIOS (same page as for latencies) from default 10 to 15. The please disable legacy USB and test with http://www.memtest.org. You can follow the link in my signature for the tested settings and all settings not listed should be set to Bios default or Auto! Link to comment Share on other sites More sharing options...
punchie137 Posted November 10, 2006 Author Share Posted November 10, 2006 thank u for the info. i am now able to play G R A W but still getting dropped in 2142 and fear. could u please tell me where the command rate is in bios. its the only thing unable to find. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 11, 2006 Corsair Employees Share Posted November 11, 2006 That MB should have the command Rate set to 2T if its listed. But Intel chipsets do not support it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.