boomstick Posted October 28, 2006 Share Posted October 28, 2006 Ok, I set my BIOS setting to default, tested each module separately and one of my modules failed instantly, within 1 min. of memtest86 I had close to 300k errors. After one full pass, over 525k errors. I used the same slot to test each of the four modules and the bad one failed repeatedly while the others had 0 errors on 3 or 4 complete passes. I then loaded 2 good modules in dual channel and had 0 errors with several passes. I had my voltage set to 2.1 as well. I would say the module is bad, so where do we go from here? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted October 28, 2006 Corsair Employee Share Posted October 28, 2006 Let's get them all replaced. Please use the RMA request found in TSXpress or follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.