Jump to content
Corsair Community

it'll post, but reboots when i try to install an OS


imotic

Recommended Posts

It also reboots as soon as Memtest starts too. The thing is, it ran fine before I installed some new processors.

 

Here are some relevant system specs- let me know if there are any other specs you'd like.

 

MSI K8T Master2 motherboard

2 Opteron 248 processors

Corsair XMS 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200) ECC Registered Dual Channel TWINX1024RE-3200LLPT

 

 

Previously, I had a single Opteron 242 processor, and I had no problems with anything.

 

It doesn't reboot if I turn ECC off in the BIOS, but memtest does fail fairly quickly (and I know that ECC really does need to be on for this RAM/board). CAS is set to 2.0 (nothing fancy), I've tried setting voltage to both "auto" and 2.65V, but with no effect.

 

BIOS was originally at v1.1, but after having this problem, I flashed it with v1.35, no difference. Please, if you have any other ideas, please let me know.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...