SpeedyMan Posted October 20, 2006 Share Posted October 20, 2006 Okay, my system will post with the memory set to DDR2 800, with everything set to Auto for voltage, and SPD for timings. Now the timings are wrong they list in BIOS as 5-4-4-15, not 5-5-5-15. Now when I set them to 5-5-5-15 there is also another number that I believe is listed at 4, the system will not post. Now thats all and fine but my memory will error out in test 5 in about 2 hours. I am running the latest BIOS for this board 1407. Any help or insight will be much appreciated. I am retesting atm to see if I get the errors. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 23, 2006 Corsair Employees Share Posted October 23, 2006 Please follow the link in my signature for the tested settings and any setting thats not listed should be set to Auto or Bios default! But you will need to set the memory frequency at 667 Mhz and over clock your CPU with this MB. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.