jmmangubat Posted October 20, 2006 Share Posted October 20, 2006 Hi anyone, I purchased an ASUS A8n32sli deluxe mobo with an AMD Athlon 64 X2 3800 pro. Is it ok to use a 1 module CMX1024-c2 1G corsair mem or do i have to put in a dual channel memory for this Mobo. With a 1module 1g CMX 1024-c2 i am always getting the blue screen of death while installing, any help pls? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 20, 2006 Corsair Employees Share Posted October 20, 2006 Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.