Jump to content
Corsair Community

Intel DG965OT and TWINZ2X1024A-6400


DarthZug

Recommended Posts

I got an Intel DG965OT motherboard, and TWIN2X1024A-6400. I can not get the OS to load on the system. It keeps getting blue screen errors. I can not set the voltage in the BIOS. I checked the website and the memory was listed as compatible.
Link to comment
Share on other sites

I tried just one DIMM. Still BSOD. I did check the Intel website and the motherboard only uses 1.8V DIMMs. The ones I have are 1.9V. I can't get the system up to run the mem test. Below is the rest of the system.

 

 

 

Intel Pentium D 930

Intel DG965OT

WD SE16 400GB SATA

NEC DVD-RW

Silverstone 520W PS

Link to comment
Share on other sites

  • Corsair Employees
I would check with Intel and see if they have a newer bios that will allow you to set the memory voltage.Other wise I am sorry if you cannot set the minimum Voltage these modules may not run properly. And I would see of the reseller will let you send them back and get VS2GBKit667D2 instead.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...