Jump to content
Corsair Community

Trouble with TWINX2048-3200PT - Case #215679


vulcan7618

Recommended Posts

I am running Memtest 86 and the error count has now reached 512,000 after 44 minutes of running it. One of the modules is not bootable and the other is the one with this many errors. The error count went into the 3000s almost as soon as the test began. I have already disabled LEGACY USB SUPPORT and set the voltage to 2.75v as instructed by my email from Corsair. Please let me know when I can RMA!!!
Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...