Jump to content
Corsair Community

Corsair Value Select - Vs512mb400


Recommended Posts

I believe this stick to be bad.


Motherboard: Foxconn 865A01-PE 6ELS.

FSB: 200mhz (DDR400), 3-3-3-8, Std. Voltage, Legacy Off, Single Channel


It was tested by itself in 2 different slots with Memtest86+ v1.65 and failed.


For verification is was tested in a second board.


Motherboard: ECS L7VMM3 v.3.0

FSB: 200mhz (DDR400), 3-3-3-8, Std.+ Voltage, Legacy Off, Single Channel


Same result. Thank you.

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...