Gazzamcg Posted October 5, 2006 Share Posted October 5, 2006 Hi all, I've upgraded from 2 x 512mb 1gb to 4 x 512mb 2gb of corsair value select vs512mb400 cl2.5 ram. The bios is setting the ram to 333mhz, and being a complete novice at manually setting ram times, I'm wondering if it is possible to run this setup at 400mhz, and if so what should I set the timings to ? Thank you. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 5, 2006 Corsair Employees Share Posted October 5, 2006 Yes you can try and manually set the memory frequency to DDR400 but I would set the memory Voltage to 2.8 Volts as well and test the system with http://www.memtest.org to be sure its stable! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.