meisterlr Posted October 4, 2006 Share Posted October 4, 2006 Hi- Which one of these should be used, esp. with my rig, to test for RAM errors? (Assume you can see my rig specs that I had to enter to join this site). P.S. What voltage should my RAM be set to? I'm using 1.95V now. Update: ran Memtest 1.65. No errors on tests 1-8, but test 10 (uncached) produced two errors before I stopped it at ~276% complete (?). Is test 10 not appropriate or should I take this as a true and relevant error? Thanks! -Larry Link to comment Share on other sites More sharing options...
Wired Posted October 4, 2006 Share Posted October 4, 2006 Memtest86+ v1.65 would be the correct one. FYI, you don't HAVE to enter in the system specs to sign up, but it sure does help us help you :) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 4, 2006 Corsair Employees Share Posted October 4, 2006 You need to read the readme file if you want to run the un-selected tests. And I would just use the default tests. Link to comment Share on other sites More sharing options...
meisterlr Posted October 8, 2006 Author Share Posted October 8, 2006 Please advise as to correct voltage. I'm using 2V now. Thanks! Link to comment Share on other sites More sharing options...
Wired Posted October 8, 2006 Share Posted October 8, 2006 2.1 volts IIRC Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.