tee2 Posted October 3, 2006 Share Posted October 3, 2006 I had a power supply go bad in my daughters computer that was not runnig very stable. I replaced the PS and had problems with programs not running, and lock-up. I tried to fix windows with no luck so formated the HD and reinstalled XP. I can't get XP to install with out a blue stop error screen. it says, Stop: 0x0000008E, 0X80010031, 0xf874550, 0x00000000 Dump of physical memory Is this a memory problem? My memory is VS1GBKIT400, I am just using one chip the oher is in another computer. The MB is MSI K8N Neo4-F Socket 939 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 3, 2006 Corsair Employees Share Posted October 3, 2006 Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
tee2 Posted October 3, 2006 Author Share Posted October 3, 2006 I pulled the module and put it in a working system to run memtest and the errors started. I'll follow the link and do a RMA. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 4, 2006 Corsair Employees Share Posted October 4, 2006 NP But I would suggest you get both modules replaced! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.