Jump to content
Corsair Community

TwinX 3500LLPRO and A8N32-SLI settings


Renniegade

Recommended Posts

If I stated that I was stressed out of mind that would be an understatement!

 

I've been reading and trying to configure my board and RAM to run at 433DDR for like 7 hours now! I've done everything RAM guy said, I've viewed the screenshots, and copied the settings, but with no success.

 

My setup:

 

Asus A8N32-SLI Deluxe BIOS v1303

Corsair TWINX 3500LLPRO (2x1024)

AMD 64 X2 3800+

2x BFG Tech 7800GTX OC 256MB GDDR3 PCI-E SLI'd

1x WD 36GB Raptor 10,000RPM

1x WD 320GB Caviar S-ATAII 7200RPM

Seasonic 600W PSU (SLI and X2/FX rdy)

Kingwin Aluminum Case

Lite-On DVD/RW +/-

XP Pro w/ SP2

 

RAM guy can you give me the proper settings so that my system recognizes the RAM at 433MHz and the PCI-E cards running in SLI at their best potential? If you can help me out that would be awsome!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...