umax7 Posted September 30, 2006 Posted September 30, 2006 Just built a new system with the Asus P5B Deluxe using a C2D 6600 processor and Corsair XMS2 DDR2 memory 2 sticks of CM2X512A-6400. My problem is when i have both sticks installed in A1 and B1 slots i get nothing, it powers up but no display and no beeps. With the help of Asus tech support I got it running with just 1 stick in B1 slot, he told me to update the bios "version 0706" and try it again with both sticks. Well i did the update and still wont run with both sticks. This memory is on the QVC list for this board. Is it bad memory or what? It will run with either stick in B1. What can I do to fix this?
Corsair Employee RAM GUY Posted October 2, 2006 Corsair Employee Posted October 2, 2006 If the system will not post in D/C but will run and pass http://www.memtest.org one module at a time that would suggest a problem with the MB or the Bios update was not done properly. I would check with the MB maker to be sure!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.