blfolson Posted September 25, 2006 Share Posted September 25, 2006 hello, looking for some help with base timming bios setting for XMS pro 3200c2 on a DFI nfII ultra infinity. Any help would be greatly appreciated Also if anyone has some experience with this combo and found a good bios i would greatly appreciate that as well Link to comment Share on other sites More sharing options...
Wired Posted September 25, 2006 Share Posted September 25, 2006 CAS Latency (tCL): 2.5 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.7-2.8 Volts (Warrantied up to, but not over, 2.90 volts) All other settings to defaults. Source: Corsair XMS Qualification and Testing Information Link to comment Share on other sites More sharing options...
blfolson Posted September 25, 2006 Author Share Posted September 25, 2006 thank you very much for the responce and move i wasnt sure where to post. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 25, 2006 Corsair Employees Share Posted September 25, 2006 Please let us know how you make out or if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.