shao.fu.tzer Posted September 19, 2006 Posted September 19, 2006 At 3-3-3-8 2T timings, this stick consistently statrs spitting out errors by the bucketload. The stick I just got back from you guys is alright - I suppose I should have tested both before just assuming only one was the problem. I need an RMA number please! Thanks! Theresa Le
Corsair Employee RAM GUY Posted September 19, 2006 Corsair Employee Posted September 19, 2006 Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.