Exiled Posted September 14, 2006 Share Posted September 14, 2006 my twin2x1024-5400c4 ram cannot run at default setting and so far any other setting i've tried when i set the ram speed to 667MHz. though in some settings it can boot into windows but when running applications crash or reboot will occur. So far i'm only able to run it stably at 533MHz. Can anyone teach me how to set it to run stably at its rated speed, 675MHz or at least 667MHz? Thanks in advance. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 14, 2006 Corsair Employees Share Posted September 14, 2006 Please make sure that you have the latest bios and load setup defaults and set the memory voltage to 2.1 Volts and set the tested settings and test the modules with http://www.memtest.org and please note you may have to disable legacy USB when running any memory test with this MB. Link to comment Share on other sites More sharing options...
Exiled Posted September 14, 2006 Author Share Posted September 14, 2006 Please make sure that you have the latest bios and load setup defaults and set the memory voltage to 2.1 Volts and set the tested settings and test the modules with http://www.memtest.org and please note you may have to disable legacy USB when running any memory test with this MB. thanks for the fast reply. i have updated the bios and everything is set to default. but the maximum Vdimm i can set for this particular mobo is just 1.95V. is it sufficient for the ram? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 14, 2006 Corsair Employees Share Posted September 14, 2006 Try it and see, but we test these modules at 1.9 Volts! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.